Sub-framework bar
For all foundations, with corresponding supports as required.
No guarantee that colours will match.
Not dyed with UV-resistant dye.
Rubber pad
For laying under sub-framework bars, aluminium sub-framework profiles and aluminium joint and edge cover profiles.
Aluminium sub-framework profile 60 × 20 × 2
As sub-framework for low heights, exclusively for use with tiles.
(not suitable for profiles).
| Material | Natural aluminium
|
Aluminium joint cover profile
Two parts, for covering separating and expansion joints. The base
profile is fastened using anchors and screws obtained by the customer.
The cover profile is fastened using countersunk sheet metal screws 4.2 × 70
mm.
| Material - cover profile | Anodised aluminium
|
| Material - base profile | Natural aluminium
|
Aluminium edge cover profile
Two-part, for covering straight or angled edges of terrace surfaces. The
base profile is fastened using anchors and screws obtained by the
customer. The cover profile is fastened using countersunk sheet metal screws
4.2 × 70 mm.
| Material - cover and base profile | Anodised aluminium |
Aluminium wall connection profile
For covering building- or wall-side expansion joints in combination with aluminium cover angle.
| Material | Anodised aluminium
|
Aluminium cover angle
For covering building- or wall-side expansion joints (installation
together with aluminium wall connection profile) and for covering straight or
angled tiled surface edges.
| Material | Anodised aluminium
|
pan head screw 4,0 × 40
For hidden fastening of terraza tiles. Pan head with driveT 20, incl. bit
| Material | Stainless steel A2 |
countersunk screw 4,0 × 60
For visible fastening of the edge and corner tiles.
Countersunk head with driveT 20, incl. bit
| Material | Stainless steel A2 |
Countersunk screw 3.5 × 30
For fastening the aluminium cover angle as edge covering. Incl. bit.
| Material | Stainless steel A2 |
Sheet metal screw 4,2 × 50
For fastening the alum. joint cover prof le and the alum. edge cover prof le when installing terraza tiles to the alum. sub-framework prof le. Recessed head with drive T 20.
| Material | Stainless steel A2 |
Sheet screw 4.2 × 70
For fastening the two-part alum. joint cover profile and the alum. edge
cover profile when installing terraza tiles and to sub-framework
bars.
Recessed head with drive T 20.
| Material | Stainless steel A2 |
Self-drilling screw 3.9 × 32
For hidden fastening of terraza tiles to aluminium sub-framework profiles.
Pan head with drive T 20, incl. bit.
| Material | Stainless steel A2 |
Self-drilling screw 4.2 × 50
For visible fastening of terraza tiles to aluminium sub-framework profiles. Countersunk head with driveT 20, incl. bit.
| Material | Stainless steel A2 |
Care oil 2.5 l (colourless)
For maintenance of WERZALIT terrace surfaces. Freshens up the surface and helps prevent soiling of heavily used terraces.
Note:
WERZALIT terrace flooring does not necessarily have to be treated with care oil, however, this may be done if the customer desires. For more information, please request a copy of our care instructions.
| Coverage | approx. 50 m² for 1 coat, approx. 40 m² for 2 coats (2.5 l container)
|
Terrace cleaner
WERZALIT terrace cleaner is a highly effective liquid cleaner for WERZALIT terrace flooring.
It removes thoroughly darkcoloured soiling, spots and films resulting from trees, plants, etc. Residues due to environmental infl uences are also effectively and thoroughly removed. At the same time, it protects the surface against future soiling.
| Packaging unit | 1 pc. = 1 litre |
The square terrace tiles offer an attractive alternative to profiles. Laid in the same direction, alternating in a chequered pattern or offset by half tiles, the grooved surface gives rise to a variety of floor textures.
